Plockmatic pbm350 fold rollers issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Amor1210
    Junior Member
    • Aug 2023
    • 2

    #1

    Plockmatic pbm350 fold rollers issue

    I have a client who just received this plockmatic and the fold rollers are leaving marks. They are the first set of fold roller that aren't smooth and those grooves are marking the sheets lead to trail. This happens on just a single sheet of card stock. I have tone of plckmatics out there and this is a first. Don't recall ever having to adjust these rollers for any gap adjustment in the field. Anyone ever have this issue?
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37489

    #2
    Re: Plockmatic pbm350 fold rollers issue

    It sounds to me like the rollers might be contaminated with toner or something. To clean them you will need to use something with grit. Scrubs hand cleaner cloths or water-less hand cleaner to lift the contamination out of the surface.

    Comment

    • Amor1210
      Junior Member
      • Aug 2023
      • 2

      #3
      Re: Plockmatic pbm350 fold rollers issue

      Originally posted by slimslob
      It sounds to me like the rollers might be contaminated with toner or something. To clean them you will need to use something with grit. Scrubs hand cleaner cloths or water-less hand cleaner to lift the contamination out of the surface.

      Brand new unit. Hasn’t even had time to get dirty with toner. Should have probably stated that in original post.

      Comment

      Working...