p7145 overtoning

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vespa geoff
    Technician
    • May 2009
    • 37
    #1

    p7145 overtoning

    hi all , have a gestetner p7145 printer which keeps over toning change drum, dev , and td sensor work for a while then overtones again. any help welcome.
    Tags: change drum, hi all, id sensor, overtoning, p7145
    • iMind
      Vacuum Cleaning Expert

      1,000+ Posts
      • Mar 2008
      • 1116
      #2
      Originally posted by vespa geoff
      hi all , have a gestetner p7145 printer which keeps over toning change drum, dev , and td sensor work for a while then overtones again. any help welcome.
      What SPs did you do
      sigpicWe can all Win, but at the end we all loose. Save the greyhound

        Comment

        • vespa geoff
          Technician
          • May 2009
          • 37
          #3
          should have said correct sp,s codes entered. from service manual

            Comment

            • iMind
              Vacuum Cleaning Expert

              1,000+ Posts
              • Mar 2008
              • 1116
              #4
              I mean you should have done SP 2.801 for TD sensor initial setting, 2.805 for Development initialization and 3.001.02 for ID Sensor initialization, this is done when you change the drum.
              sigpicWe can all Win, but at the end we all loose. Save the greyhound

                Comment

                Previous template Next
                Working...