PRO 1106 sc670

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • huberto233
    Technician
    • Nov 2008
    • 40
    #16
    yes, the firmware fixed the problem as it is a custom firmware fixing sc 670. Also you don't have to update both engine ans system firmware first as this custom firmware is one of them ...
    Network+,

      Comment

      • tcs04
        FORMER Techie

        1,000+ Posts
        • Apr 2009
        • 1183
        #17
        Originally posted by huberto233
        yes, the firmware fixed the problem as it is a custom firmware fixing sc 670. Also you don't have to update both engine ans system firmware first as this custom firmware is one of them ...
        Thanks for the info, I'll take a look on Ricohtechnical and see if it's needed on any of my machines.

        .............................. Mmmmmmm... (2 mins later)

        Just checked and that firmware is 18 months old!!

        VER 5.22:20 D1015223C november 2008 production

        VER 5.23:20 D1015223D JUNE 2010 production !!!!!

        ............is newer AND contains a fix for SC670!! and Machine stall in DF jam (IS THERE A POST FOR THIS !??).. and Jam 57... AND a SECOND fix for SC670!!!!

        It seems there's NO substitute for looking it up yourself!

        (Latest System is D1015541F August 2009)
        Last edited by tcs04; 07-31-2010, 04:56 PM.

          Comment

          • tcs04
            FORMER Techie

            1,000+ Posts
            • Apr 2009
            • 1183
            #18
            Originally posted by evomaster
            hi,

            try the firmware: D1015223C_LR0383.fwu


            i had the same problems ... since i updated the 1106ex/mp9000 ... no more problems ...
            OLD FIRMWARE!!!! VER "D" June 2010!!!! solves SC670!

              Comment

              • huberto233
                Technician
                • Nov 2008
                • 40
                #19
                I agree that version "D" is the latest version of engine firmware and fixes the sc 670's since officialy released in June. This firmware D1015223C_LR0383.fwu it was CUSTOMED and BETA version of version "D" and officially released and known as "D" . IT was not the same as "C" version !

                Obviously it does not change a fact that form June version "D" has been officially recommended and should have been applied.

                Regards
                Network+,

                  Comment

                  • evomaster
                    #20
                    Originally posted by huberto233
                    I agree that version "D" is the latest version of engine firmware and fixes the sc 670's since officialy released in June. This firmware D1015223C_LR0383.fwu it was CUSTOMED and BETA version of version "D" and officially released and known as "D" . IT was not the same as "C" version !

                    Obviously it does not change a fact that form June version "D" has been officially recommended and should have been applied.

                    Regards

                    this firmware is a special one for "SC670" ... only to fix the error in the engine-frimware ....

                      Comment

                      • flo
                        Engineer
                        • Mar 2009
                        • 44
                        #21
                        SC 670

                        Its unbelievable but this Code refreshing from another Place in the Machine.

                        First go in ur SP mode and set Autostart after SC Code to OFF
                        Then look at Toner recyclingunit above the dev unit (it stays on top in machine when u take out dev unit)
                        It have there some thik parts of Toner and Mud u must clean it very deep and u ll see its go fine

                          Comment

                          • tcs04
                            FORMER Techie

                            1,000+ Posts
                            • Apr 2009
                            • 1183
                            #22
                            Originally posted by evomaster
                            this firmware is a special one for "SC670" ... only to fix the error in the engine-frimware ....
                            "C" is an OLD VERSION! check the "D" version on the website! that is the production version of the firmware you are quoting!................. anyway, the machine is fixed!!

                            Strangely, however, The MP1100 lists D1015223C as the lastest version...

                              Comment

                              • iMind
                                Vacuum Cleaning Expert

                                1,000+ Posts
                                • Mar 2008
                                • 1116
                                #23
                                Originally posted by evomaster
                                special one...
                                sigpicWe can all Win, but at the end we all loose. Save the greyhound

                                  Comment

                                  • tcs04
                                    FORMER Techie

                                    1,000+ Posts
                                    • Apr 2009
                                    • 1183
                                    #24

                                      Comment

                                      • mr.rajesh@ricoh.co.in
                                        #25
                                        Re: PRO 1106 sc670

                                        Hei,
                                        I had also faced the same problem,and replaced OPC drum,Problem solved.

                                          Comment

                                          Previous 1 2 template Next
                                          Working...