MP 5000 adjusting 2nd side registration lead to trail on duplex copies

[rednecktech]

Hello All,
I have a MP 5000 B/W giving me some fits. The customer is making a two sided copy from 2 originals without using the document feeder. They set.original #1 down, scan it then original #2 and scan it. Page #1 lead to edge registration is fine, the 2nd side is off about 5mm lead to trail. I am looking for a way to adj lead to trail on second side. I have found lead to edge adjust in SP 1001, number 7 refers to Duplex:Plain , this only moves the first side not the second. Does anyone know what I might be missing. Thanks in advance!!

[Fearless V K]

User Tools - Copier/Document Server Features - Edit - Back Margin Top/Bottom (Set to 0.0).
(You may also want to set Back Margin Left/Right to 0.0)

[GhostInTheMachine]

User Tools
Copier/Document Server Features
Edit tab
set 1-sided to 2-sided Auto Margin to 0

[rednecktech]

Thanks guys I will try this and let you know what I find. I have been in there and changed the Top/Bottom to 0. Thanks again!

[rednecktech]

UPDATE: Fixed, or more like I figured it out. The customer had went under Edit/Margin on the "ready" screen and adjusted the second side over to the left .2 inches. I centered it and saved it, second side registration is fantastic. I knew it was a setting some where versus a mechanical problem, just couldn't find where they had messed with the settings. Thanks for all of the replies!!

[Fearless V K]

The user tools settings mentioned do the same thing. if you change them, you will see that reflected in the edit/margin settings where you adjusted it.