jamming at external tray off every 10 to 15 prints from bypass and all trays no matter which tray u use. also jams especially when using external and internal tray. fuser unit is brand new and the exit sensor is working perfect in input. duplex has been changed with no effect.
-
-
What Jam code are you getting? Have you tried cleaning the bridge rollers? Have you tried taking the finisher options off and running it?the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed. -
jam code is 63. there is no finisher connected to this machine. when i feed a4 landscape through its jams leaving half of the a4 onthe external tray and the oher half i the duplexComment
-
Bent mylars on the transport path on the left side. You have to disassemble to see them. Test by manually rolling paper thru the transport area.sigpic
You never realize how cheap a professional is until after you let an amateur do it.
A+; Network +; PDI+Comment
-
where is exactly is the transport path. you mean in the duplex?Comment
-
Left side, is inverter side, duplex tray is located under the transfer belt. There is a bulettin for these mylars.
Where is the first handle you open to remove fuser module? There it is...Comment
Comment