MPC-7500 face up copying without going to inverter

[sabah_karim]

hi dear

My mpc - 7500 while copying is always going to inverter unit that causes jams
is coming out from face down. I won't have idea how change from operation
side to take copy out face up.some setting to change in operational part
so looking for help from all of you.

thanks

sabah

[Cipher]

123 > Copier / Document Server Features > Input / Output > Eject Copy Face Up / Down in Glass
Mode

The printer driver should have a option some where as well.

[EDIT] There is a printer bit switch setting which can be altered to change the default output to face up.

[sabah_karim]

Hi Cipher
Thanks for reply i want this features over ADF not through glass.Want all copy using ADF will come out face up without
using inverter.Is any option to change in copy / document server or any where. Thanks

[Cipher]

Add the short cut key 'Reverse Ejection: Face Up/ Down' via the customize function.

I think you can get it to work from the ADF using that.
But it looks like you may have to feed in your originals in reverse page order (10-1) to have them output face up in the correct page order (1-10).

Copy Face Up
• Copies are delivered face down (in the same order as the original) if Thin Paper, Plain Paper 1,
Plain Paper 2, Middle Thick, or Thick Paper 1 is specified.
• Copies are delivered face up (in reverse order of the original) if Thick Paper 2 or Thick Paper 3
is specified.
• Tab stock is delivered face down regardless of its paper weight.

*It looks to be a limited feature where certain scenarios would cancel face up output.