ricoh 1045 sc 546

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • CrapAimer
    replied
    Poor Lamp connection clean the hard toner off them.

    Leave a comment:


  • duct tape
    replied
    You can also shim out the fuser connector on the fuser I've seen that work on a few machines

    Leave a comment:


  • Ltd
    replied
    Originally posted by leo34staffs
    hi guys, i have a machine in the field that every couple of weeks or so gives a sc 546, new thermisors front and rear and new ufr( not original) any ideas? Lamps check ok.
    Replace Electrical connector terminal at fuser unit .

    Leave a comment:


  • Zeldaman
    replied
    Originally posted by leo34staffs
    hi guys, i have a machine in the field that every couple of weeks or so gives a sc 546, new thermisors front and rear and new ufr( not original) any ideas? Lamps check ok.
    Hi there!
    Check,clean or replace the thermofuses and use the origin-Hotroller the OEM-Parts sucks!
    Greetings

    Leave a comment:


  • jeffreyozz
    replied
    make sure the hot roller is for a 1035- not a 2035 or 350. each machine has a unique roller thickness.

    Leave a comment:


  • leo34staffs
    started a topic ricoh 1045 sc 546

    ricoh 1045 sc 546

    hi guys, i have a machine in the field that every couple of weeks or so gives a sc 546, new thermisors front and rear and new ufr( not original) any ideas? Lamps check ok.
Working...