If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Pulling out what little hair I have left, trying to find two fuses. F-1 High Voltage Power Supply F-1(2.5a / 72v) ,and Lamp Inverter F-1(1.25a / 250v). I have partial power to the copier FU1 is good on the power supply board.
Pulling out what little hair I have left, trying to find two fuses. F-1 High Voltage Power Supply F-1(2.5a / 72v) ,and Lamp Inverter F-1(1.25a / 250v). I have partial power to the copier FU1 is good on the power supply board.