RICOH Priport Jp755 ..E-00

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zaza
    MECANOGRAPHE

    1,000+ Posts
    • Mar 2008
    • 1095

    #16
    well ..friend tech codex ...you are from Italy ..unfortunate our friend tech sweet ..is from ALGERIA ..l'am from ALGERIA to ...pls if you have the sm or pm for this ricoh priport jp775 sent me there ...my email : mecanographe@gmail.com
    thx advans .
    BEST TECHNICIAN . NICE PEOPLE .

    Comment

    • Codex
      Senior Tech

      500+ Posts
      • May 2008
      • 704

      #17
      Originally posted by zaza
      well ..friend tech codex ...you are from Italy ..unfortunate our friend tech sweet ..is from ALGERIA ..l'am from ALGERIA to ...pls if you have the sm or pm for this ricoh priport jp775 sent me there ...my email : mecanographe@gmail.com
      thx advans .

      Hello my friend
      it's no problem that you are from Algeria, i send the head via postal service , not walking! (LOL)
      I LOOK IF I HAVE THE pm OR sM OK?
      Memento Audere Semper

      Comment

      • Joel
        Technician
        • May 2010
        • 46

        #18
        Sir,
        How about try a new original or test it again.

        Comment

        • sweet.persona
          Engineer
          • Nov 2009
          • 414

          #19
          Hhhhhhhh

          i was try 10000 once
          A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


          DAMENE ABDEL AZIZ
          DJELFA

          Comment

          • Codex
            Senior Tech

            500+ Posts
            • May 2008
            • 704

            #20
            Hello

            i think it's the Thermal Head, i saw the pic you posted here
            Memento Audere Semper

            Comment

            • sweet.persona
              Engineer
              • Nov 2009
              • 414

              #21
              But how to test It !!
              how to know if the thermal head is Bad or good!!
              A GREAT PLACE TO WORK - A GREAT PLACE TO GROW!


              DAMENE ABDEL AZIZ
              DJELFA

              Comment

              • Codex
                Senior Tech

                500+ Posts
                • May 2008
                • 704

                #22
                Originally posted by sweet.persona
                But how to test It !!
                how to know if the thermal head is Bad or good!!
                The only way is to make a copy and then look on the drum, if there is nothing the Head is bad, you can also check the connection harness and cables. Let me know
                Memento Audere Semper

                Comment

                • rsyarcia
                  Hair Straightener Tech

                  500+ Posts
                  • Feb 2008
                  • 711

                  #23
                  Make a copy then after that remove the master that was wrapped around the drum. look if there are holes on the master through a light source(flourescent).If there are no holes then thermal head problem.shukran
                  Nobody is perfect..

                  Comment

                  Working...