Ricoh af1075

[kkwong0209]

I have a machine Af1075. Once i switch on the machine. Sc672 was shown. How to solve it?

[Codex]

Check the controller connections, on the controller is a small button, push it when the machine is turned on, this resets the controller

[spaceman99]

sc672 = caused by the controler Psu board sitting at the bottom of the controller.
also can be caused by HDD and the interface pcb HDD to Controller.

More likely the Controler PSU.
good luck

[duane@pbbsinc.com]

I have had this problem happen two times one time it was the controller board and the other it was simply re formatting the hard drive..If that does not work you have too change the hard drive i believe it is an IDE TYPE HDD..40or80 gig do not think size mattered..

GOOD LUCK

[Sashko]

If printer/scanner module installed, clean the contacts on DIMM module (memory).

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com