aficio 2045e SC 990

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hknwbec
    Trusted Tech
    • Jan 2010
    • 214

    #1

    aficio 2045e SC 990

    Could you tell me how to solve the above mentioned service code. it was showed on the display after installing the rj 45 network card and ram both were taken from used aficio 2035 machine. Best regards
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2931

    #2
    Re: aficio 2045e SC 990

    I would try reseating the memory dimms or try different memory. Check the installation procedure.
    Attached Files
    NEVER ASSUME ANYTHING

    Comment

    • Jomama46
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2008
      • 2900

      #3
      Re: aficio 2045e SC 990

      Also update the firmware. Disconnect the HD and see if it gets rid of the code.
      sigpic
      You never realize how cheap a professional is until after you let an amateur do it.
      A+; Network +; PDI+

      Comment

      • jonhiker
        Senior Tech

        500+ Posts
        • Apr 2010
        • 661

        #4
        Re: aficio 2045e SC 990

        Originally posted by Jomama46
        Also update the firmware. Disconnect the HD and see if it gets rid of the code.
        X2 and reformat the hard drive.

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838

          #5
          Re: aficio 2045e SC 990

          This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
          Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

          Paul@justmanuals.com

          Comment

          • hknwbec
            Trusted Tech
            • Jan 2010
            • 214

            #6
            Re: aficio 2045e SC 990

            Originally posted by manuals4you
            This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
            Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

            Paul@justmanuals.com

            Do you have the firmware for use in Aficio 2035 and 2045, 2045e 1034, 1045 and also any software can reset the copier counter.

            Comment

            • hknwbec
              Trusted Tech
              • Jan 2010
              • 214

              #7
              Re: aficio 2045e SC 990

              Originally posted by Jomama46
              Also update the firmware. Disconnect the HD and see if it gets rid of the code.

              how can I have the firmware and how much is it. could you offer to me. Is it possible to reset the copier counter

              Comment

              • JustManuals
                Field Supervisor

                5,000+ Posts
                • Jan 2006
                • 9838

                #8
                Re: aficio 2045e SC 990

                1- I do not have firmware for Ricoh.

                2- Now why would you want to reset the counter?

                Comment

                • hknwbec
                  Trusted Tech
                  • Jan 2010
                  • 214

                  #9
                  Re: aficio 2045e SC 990

                  We are one short term rental service, for easy meter count, as the meter reading is over hundres thousand, but copy and condition are very good under our maintenance.

                  Comment

                  • hknwbec
                    Trusted Tech
                    • Jan 2010
                    • 214

                    #10
                    Re: aficio 2045e SC 990

                    Could we install 1045 printer kit on 2045e, is it workable

                    Comment

                    Working...