[Error Code] SP-C400DN Replace PCU Black error

[Guest]

Kinda of new to using these types of printers, really anything that is not an HP printer is new to me. It gives me a Replace PCU Black error, was just wondering how i access the correct menu to clear this message or if i should strait up replace the PCU. I believe i can get a few more uses out of the PCU before it really needs to be replaced.

[TonerMunkeh]

Re: SP-C400DN Replace PCU Black error

You can run the machine for as long as you want with the message showing, but you can't reset it without actually replacing the PCU. If you do, the machine will think it's had a new one installed anyway and do certain initialisation settings that should only be done on a new drum and the copy quality will go to rat poop. If it starts giving you lines, then replace it.

[SMS-Techie]

Re: SP-C400DN Replace PCU Black error

All right, thanks! The staff tend to go crazy sometimes when they see error messages.