MP C2800 SC400

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • buttalasso
    • Jul 2025

    #1

    MP C2800 SC400

    Hi everybody,
    I have a machine that has SC400.

    I did the following operations:
    • cleaned the density sensors
    • cleaned the ITB
    • changed the density sensor
    • changed the IOB
    • changed the ITB
    Vsg are normal on every colour.
    3-325 is 111112

    Any suggestions?

    I'm going to change the BICU and the harness of the density sensor

    Please HELP!

    Thanks in advance
  • buttalasso

    #2
    Re: MP C2800 SC400

    News!

    Changed the density sensor assy...

    Nothing

    Comment

    • xordi69
      Trusted Tech

      100+ Posts
      • Jun 2010
      • 200

      #3

      Comment

      • buttalasso

        #4
        Re: MP C2800 SC400

        Problem fixed!
        It was the cable from the IOB to the density sensor, the first cable of the pair. I unhooked all the cable from the edge of the IOB board and the error disappears. Hooked all the cable, the machine was perfedt. So I ordered the cable interested.

        P.S: I had a suggestion of a Ricoh technician

        Comment

        Working...