AF 2060 SC322

[georgereth]

I have a problem with this machine
first when i turn on the machine its start runing (drum-developer motor) and shows please wait . It does not stop , when i open and close the font door or the main switch the machine shows ready. After that i try to make a copy the machine shows
error sc 322 and feed the paper out (white nothing print on paper)
any ideas about that problem ?
Thanks

[Jomama46]

Re: AF 2060 SC322

Clean the laser unit area, especially at the ends. replace the front door switches, replace the IPU, replace the Laser unit.

[tcs04]

Re: AF 2060 SC322

I have a problem with this machine
first when i turn on the machine its start runing (drum-developer motor) and shows please wait . It does not stop , when i open and close the font door or the main switch the machine shows ready. After that i try to make a copy the machine shows
error sc 322 and feed the paper out (white nothing print on paper)
any ideas about that problem ?
Thanks

This may seem strange, but try cleaning the relay and registration sensors. They can cause laser start problems.

[Polo-022]

Re: AF 2060 SC322

Laser Sychro. Board, the tiny one at the front right corner is dirty...
Usually it happens at first opening.