MPC2500

[staffie man]

Hi all.
Just wondering if a charge roller unit from a colour drum (cyan) will work in a black drum unit, i think it"s ridiculous that it"s not a service part
Thanks in advance

[rsyarcia]

Re: MPC2500

There will be problem in the copy quality.

[mikadonovan]

Re: MPC2500

I've swapped them before when I was in a pinch. I cleaned the charge roller with alcohol first, and I didn't have any CQ issues.

[staffie man]

Re: MPC2500

Thanks for replies,will try at next c/q issue.

[knightfall]

Re: MPC2500

out of curiosity which bw copier charge roller did you use on the MPC2500?

[sandmanmac]

Re: MPC2500

There's no problem swapping Charge rollers, since the whole black PCU can be used as a colour unit by simply 'edging' the plug connector on the back of the assy.

[logrady2331]

Re: MPC2500

I agree with sandmanmac, just use the K pcu for all the colors. less than a hundred for K, four times that for the colors. Just crazy they have that much profit in a part.

[staffie man]

Re: MPC2500

Both charge roller units are MPC 2500 Knightfall, I found a cyan drum unit which was low volume but the drum had failed so wanted to carry the charge unit as a spare.