Aficio 3235c laser

[xordi69]

covi3.pdf

I think in laser, but not sure, any help will be apreciated.

[TonerMunkeh]

Re: Aficio 3235c laser

Seeing as you already have the non-default data printed off, change SP2109-2 and -3 to their default values and try printing something again. This resets the laser beam pitch to it's default value and should tell you if you are looking at a laser issue. Does it do the same thing with an ACC test print on all colours or just black?

[xordi69]

Re: Aficio 3235c laser

Seeing as you already have the non-default data printed off, change SP2109-2 and -3 to their default values and try printing something again. This resets the laser beam pitch to it's default value and should tell you if you are looking at a laser issue. Does it do the same thing with an ACC test print on all colours or just black?

i will try reset ld beam pitch.I know they are two laser diodes for black, im thinking about his sensor position.
(excuse my very bad english)
thanks