ricoh pmc2051,

[tullio]

ricohmpc2051nuova.durantefirmware installation,youturn off the electricity.then thempc2051notmost '.the displaygoes out(please),
for 30-50minutes.sosiuitoandBicuengine,same problem.notchargemore 'thefirmware.

[Gift]

Re: ricoh pmc2051,

??????

[tullio]

Re: ricoh pmc2051,

firmware.lampc2051qundoproblemremains intheswitch onif theattesa.ancheI startwithfirmware.engineBicuandreplaced,the sameproblem.

[TonerMunkeh]

Re: ricoh pmc2051,

I think he's trying to say there was a power cut during a firmware update. You might have to replace the controller and BICU NVrams, unless you can set dipswitch 1 on the controller to ON and try forcing the firmware reload.

[Eric1968]

Re: ricoh pmc2051,

ricohmpc2051nuova.durantefirmware installation,youturn off the electricity.then thempc2051notmost '.the displaygoes out(please),
for 30-50minutes.sosiuitoandBicuengine,same problem.notchargemore 'thefirmware.

And I thought Zaza's posts are difficult to understand...

[tullio]

Re: ricoh pmc2051,

ok- where is'the bit,to on?thanks

[Saviour]

Re: ricoh pmc2051,

ricohmpc2051nuova.durantefirmware installation,youturn off the electricity.then thempc2051notmost '.the displaygoes out(please),
for 30-50minutes.sosiuitoandBicuengine,same problem.notchargemore 'thefirmware.

Choi Tullio, sfortuatamente il tou Inglese non e ciaro come probabilment sara il mio Italiano. Se o capito bene hai fatto un software upgrade e poi quando spegni la machine on si accende prime di 30 a 50 minuti dopo. E cosi?? Che qualche indicazzione che l alimentatore sta funzionando a ti da i 5, 12 e 24 volt o qulache altro segnio di vita.
Saluti da Malta.