If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
If you are stuck on a call with hard drive errors on a Ricoh with any RAID, just swap the SATA cables between the drives and reboot. I have done this many times with MP9000's and even a 3260 with four drives. Worked every time. Regular drives are fine.
If you are stuck on a call with hard drive errors on a Ricoh with any RAID, just swap the SATA cables between the drives and reboot. I have done this many times with MP9000's and even a 3260 with four drives. Worked every time. Regular drives are fine.
Dave
I don't know about the 2 machines you mentioned, but the C4500 uses IDE drives
Comment