If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone know which bit switch adjusts attenuation or transmission level on a Ricoh Aficio 1515, I am assuming it is one of the communication switches but I am unsure which one and I no longer have any service manuals.
If you want the modem actual volume (-dbm) it is in the NCU parameters, parameter 01. The default is 009. I would try 008 or 007 to increase the line volume of the modem.
If you want the modem actual volume (-dbm) it is in the NCU parameters, parameter 01. The default is 009. I would try 008 or 007 to increase the line volume of the modem.
Comment