Savin 9020 toner issues

[exit148]

Re: Savin 9020 toner issues

There should be a Chip on that toner ctg. If it is not on the compatible one you bought, the machine will not recognize that a new ctg (with new chip) was installed in it. Therefore making your new toner useless.

[sandmanmac]

Re: Savin 9020 toner issues

At a guess a Savin branded MPC2000......

....which would strongly suggest a toner pump issue. Well that is if the toner bottle the OP bought off "a website" isn't a complete piece of crap.

Savin C9020 crosses to Ricoh Aficio MP C2050

What the user is doing wrong is trying to save a few dollars buying sub-standard generic toner which is one of the biggest no-no's there is in these machines. The end-user needs to go back to the supplier, and return the toner, (but I doubt that's possible, so that money's gone too), buy an original cartridge, and hope that solves the problem, and that the toner pump /tubes haven't been clogged up. Trying to save a few buck this way, will cost you hundreds and hundreds of dollars more in repairs, extra replacement toners, etc. etc.

[teebee1234]

Re: Savin 9020 toner issues

What is a C9020? Can't find anything about it.

MPC2030/2050/2550

[Ollie1981]

Re: Savin 9020 toner issues

What is a C9020? Can't find anything about it.

At a guess a Savin branded MPC2000......

....which would strongly suggest a toner pump issue. Well that is if the toner bottle the OP bought off "a website" isn't a complete piece of crap.

[TonerMunkeh]

Re: Savin 9020 toner issues

What is a C9020? Can't find anything about it.

[mikadonovan]

Re: Savin 9020 toner issues

Sorry, I had advice for a 9020, which is an old analog machine. After reading your post again, I noticed you said a c9020 which I have not had any experience with.(A lot of typing for nothing after the edit).

I bought toner black toner for a Savin C9020 off of a website and tried installing it today but the copier says there is no toner. I tried shaking it before putting it back in the machine and then rebooted it but the copier still says no toner. What am I doing wrong? Has anyone had this problem before?