MPC3000 color printing restriction

[FMC]

Re: MPC3000 color printing restriction

Personally I would use PCL5 as I've had many weird problems with PCL6 ie ignoring staple commands, specific tray commands, so it may well be another thing to add to the list.

[Llama God]

Re: MPC3000 color printing restriction

Theres a Enhanced driver for this I Believe that opens up a pop up box on the PC asking for a user code Also IIRC we had to purchase a copy of said driver from ricoh when we had the same issue on the Original Athena Machines

You can enable pop-ups from the driver using Print Driver Editor (free from the Ricoh driver download site.)

[Bantams]

Re: MPC3000 color printing restriction

Theres a Enhanced driver for this I Believe that opens up a pop up box on the PC asking for a user code Also IIRC we had to purchase a copy of said driver from ricoh when we had the same issue on the Original Athena Machines

[Llama God]

Re: MPC3000 color printing restriction

On the WIM, under "user authentication management" Having the "PC control" box checked, rather than "black & white" and/or "Colour" boxes, will produce that result

He's right, you know.

[sandmanmac]

Re: MPC3000 color printing restriction

On the WIM, under "user authentication management" Having the "PC control" box checked, rather than "black & white" and/or "Colour" boxes, will produce that result

[mikadonovan]

Hey, All. I have a B230 set up with user codes, some restricted to black and white only. This works fine with copying, but printing can still be done in color even though I have the printer functions restricted to black and white only. I know I saw a similar thread on this a while back, but I couldn't find it. I have tried the universal print driver and the pcl6 with the same results. Any ideas?