MPC2500 Blurred image

[techsass]

Re: MPC2500 Blurred image

Highjack alert!

OK Jomama46 or Herrmann, how do you get the vertical line, as in just before 'FIND'???

-a -n 1 192.168.0.%i | FIND /i

[Llama God]

Re: MPC2500 Blurred image

| is shift\, it's beside Z on a proper English English keyboard.

[Llama God]

Re: MPC2500 Blurred image

[Bantams]

Re: MPC2500 Blurred image

It Isnt The Drum he said hes Changed it

Its the Black PCU assy though if he as only changed the Drum on its own

[Masterchief]

Re: MPC2500 Blurred image

It's the PCU, a common fault on the MPc6000s too in which the drums are supposed to do 450k. They never do, they smear like this.

The fault only occurs on mono too.

X2

[CableGuy]

Re: MPC2500 Blurred image

I'm putting my money on the Paper transfer roller, we negelegt to change these, I've had it on MPc2500 thru 4500's. Did one of these yesterday....

[francisco]

Re: MPC2500 Blurred image

Can anyonehelp with this prob.Blurred omage in the mornings for abbout 30 prints then works perfectly all day. Transfer cahnged aswell as the black drum as only happens on black. See attached

i had some problem and i put tray heater
never hapen again

[Masterchief]

Re: MPC2500 Blurred image

I would suggest a full clean of the Transfer/sep roller and quite possibly a replacement of this part...

So many times after changing this part have i noticed that the Image quality has greatly improved

Masterchief

[johnny32]

Re: MPC2500 Blurred image

I would suggest a full clean of the Transfer/sep roller and quite possibly a replacement of this part...

So many times after changing this part have i noticed that the Image quality has greatly improved

Masterchief

Problem sorted drum main problem but trans also acting up thanks all

[Greeny]

Re: MPC2500 Blurred image

I'd change the black dev unit . There's an obvious void , so it has to either be a dev unit or laser fault . Devs easiest and cheapest and laser units are generally reliable .

[knightfall]

Re: MPC2500 Blurred image

if the k drum was replaced and not the whole k pcu was the brass bushing on the drum unit put back, they cause alot of cq problems.

[josueol1]

Re: MPC2500 Blurred image

drum oxicidado replace pcu

[knightfall]

Re: MPC2500 Blurred image

any update on this problem?