SR3000 misfeed no paper

Re: SR3000 misfeed no paper

After new start op, the maskin copys 20-40 copys topp trey or skift trey.widt a stop the isnt visual damages on the paper.and the maskin stoping every 3-5 copys.I have tryed new bright. no luck.

[sharpmind]

Re: SR3000 misfeed no paper

Check and clean the bushings in the entrance roller. If the machine immediately shows paper jam in R1 and R3 during the startup, most likely the shift tray motor is not functioning properly.

[CableGuy]

Re: SR3000 misfeed no paper

Any more info?

[FRP]

have a mpc2500 with SR3000, paper jam R1-R3, paper stops in bright. this is not happend every time.