ricoh 7670 SC 600

[laktech]

i'm having problem with ricoh 7670.when start the machine it appear SC 600.This is error communication the main board and control panel.I check conducter wire it not problem.Can I check field on the main board?I can change component on the board.
Thank!

[lkrsardis]

7670

give it up man.

[DocF]

Be sure the connectors to the operation panel are properly plugged up. Remove and reseat the connectors to the operation panel. Op panel is more likely the issue than main board. Unless you have a board rebuilder who will still repair the panel or the main board, repairs are not cost effective at the field level.

Doc

[lkrsardis]

ft7xxx

Try Nationwide or Hytech

[DocF]

Neither Nationwide, Hytec, nor Ambassador do Ricoh analog boards any longer. Beside, unless one resides in the U. S. A. or Canada, this is not really an option.

Doc

[lkrsardis]

old ricohs

Oh well, its time for a jump to modern times. That machine sure had its day.

[red flower]

check the bin of the conector and re connect the panel or traying another panel