Ricoh MPC 3002 problem

[whitecat]

Re: Ricoh MPC 3002 problem

Reduce the rotation time of the pressure roller contact motor for the pressure position 3. Copy SP 1151-004, from default 2130msec to 800msec.

Thank you , this was it !!

[Jameswalker999]

Re: Ricoh MPC 3002 problem

Worked for me too thanks guys
James

[tufbnme]

Re: Ricoh MPC 3002 problem

Bulletin fuser clicking noise.pdf

[StephenB]

Re: Ricoh MPC 3002 problem

Is it possible that the pressure sensor ( photo interupter ) is dirty or bad. Located on right(rear) of the 3002. sensor flag is on the fuser itself.
Could the sensor not "close" and the pressure cam continues to rotate ? Making a "banging" noise.

[ESTANISLAOWENENTON]

Re: Ricoh MPC 3002 problem

it has happened to me that when putting average temperature, that is to say, thickness average, the machine takes more than three minutes in extracting the impression or copy more to print in thickness 1,2,3 etc fast exit