Ricoh 2090 service in Ft Lauderdale

Re: Ricoh 2090 service in Ft Lauderdale

If by toning you meant the parts of your prints that are supposed to be white are gray, the drum in your machine is probably worn out and needs to be replaced. The drum is not a part of any PM kit. If you get the drum replaced, it is important to make sure that the drum cleaning blade gets changed then as well.

600K maintence kit

Non-Cancellable - Non-Returnable - Non-Replaceable - Should Only be Replaced by Trained Service Personnel - Kit includes: (1) Transfer Belt, (1) Feed Belt, (1) Reverse Roller, (1) Hot Roller, (1) Pressure Roller, (1) Web (Cleaning Roller), (1) Oil Supply & Cleaning Web, (1) Cleaning Blade (Transfer Belt), (1) Web Brake Pad, (5) Hot Roller Stripper Pawl, (1) OPC Drum, (1) Transport Belt, (1) Pick Up Roller, (1) Pick Up Roller Coupling - Genuine Ricoh Brand

The last tech that was in cleaned the blade. Started clean and then 500-1000 sheets it started toning again.

i'm thinking the developer assembly has a crack or a seal is gone because it seems i'm getting excess toner when i open the right hand door.


thnks for the help

[katash]

Re: Ricoh 2090 service in Ft Lauderdale

If by toning you meant the parts of your prints that are supposed to be white are gray, the drum in your machine is probably worn out and needs to be replaced. The drum is not a part of any PM kit. If you get the drum replaced, it is important to make sure that the drum cleaning blade gets changed then as well.

sometimes the drum does not reach the target prints seems to its a drum problem or toner issue

[Athlontini]

Re: Ricoh 2090 service in Ft Lauderdale

Don't forget to check if the mag roller's coated.

[Iowatech]

Re: Ricoh 2090 service in Ft Lauderdale

If by toning you meant the parts of your prints that are supposed to be white are gray, the drum in your machine is probably worn out and needs to be replaced. The drum is not a part of any PM kit. If you get the drum replaced, it is important to make sure that the drum cleaning blade gets changed then as well.

Hey guys,

I need some service on a ricoh 2090. I think there is an issue with my developer assembly. Pages are toning. I've tried several "dealers" in the area but they cant seem to fix the problem. New PM kits and developer have been installed.

Any ideas? anyone in the area want to take a look at it?

Thanks for the help

pm or feel free to give me a call 954-491-4222

Tony