Dots on drum surface

[williekriss]

Hi there,Whats is the main reason that causing the drum have lots of dots on the drum surface?Izzit nt using OEM toner?Or weak developer?

Hope to hear from the Pro's..Thanks Ya!

[Eric1968]

Re: Dots on drum surface

Which machine?

[collme]

Re: Dots on drum surface

Which machine?

X2

[williekriss]

Re: Dots on drum surface

Owh,sorry to mention what machine.Most on those old machine like A220,A2022,A1018.

[ADRIANO]

Re: Dots on drum surface

replace the drum and developer

[collme]

Re: Dots on drum surface

replace the drum and developer

Will add charge wire/roller and drum blade to this. the whole unit should be done together not just drum and dev.

[fshead]

Re: Dots on drum surface

Will add charge wire/roller and drum blade to this. the whole unit should be done together not just drum and dev.

no charge wires on the 220 ,1022s..heat will cause toner to build up too,check fan and fuser thermister/s aren't caked with toner making
copier run very hot...