Hellow all,
I ran into this weird problem and wondering if anyone have this issue before. Machine threw sc144-2. I output check scanner lamp --- no light -- scanner motor is not moving ---- at boot up nothing moves on the scanner / adf. However, I can print smc report okay. This determines the BCU is good. I reseated all connectors from SBU to IPU and from SIO to SBU. still nothing works. any ideas? Thanks very much
Model: RICOH MP4001
Product code: D009/D091
I ran into this weird problem and wondering if anyone have this issue before. Machine threw sc144-2. I output check scanner lamp --- no light -- scanner motor is not moving ---- at boot up nothing moves on the scanner / adf. However, I can print smc report okay. This determines the BCU is good. I reseated all connectors from SBU to IPU and from SIO to SBU. still nothing works. any ideas? Thanks very much
Model: RICOH MP4001
Product code: D009/D091
Comment