If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I believe you're refering to a rescue SD card that is used in certain models to recover the machine when a firmware update goes wrong or the firmware gets corrupted and the machine is unable to boot up or rewrite the firmware.
It's a protected SD card, so it's nothing you can download - you need to order it from Ricoh, and there's one specific to each model, although I don't know if every model has one - I've only used it once on a 2075.
' "But the salesman said . . ." The salesman's an asshole!' Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.' Ibid
I'm just an ex-tech lurking around and spreading disinformation!
You will see it on for instance a MP2000SPF if you remove the entire controller box so that only the BCU is left. Then it will start up with the normal PLEASE WAIT but with "(BOOT SD CARD)" above it.
Comment