Hi Guys,
I am new to your group and have a problem with an Infotec IS 2090. Unfortunately there are no more Ricoh technicians around here to look after this "old faithful" and I am wondering who can sort me out. I have an error code SC 495 and from what I have been able to understand so far this means one or several of the following:
Toner Pump supply motor
Bad connection to pump motor
Toner supply clutch
Bad connection to supply clutch
Low toner sensor
Spring for sensor
Blocage of toner in pump or tubes
Another miscellaneous bit of information...it is impossible to remove the top (empty) toner bottle...the green tab will not push in to enable removal of this bottle
Can any of you guys out there help me please or could send me drawings, descriptions on what to do...any help would be much appreciated...all my thanks in anticipation
I am new to your group and have a problem with an Infotec IS 2090. Unfortunately there are no more Ricoh technicians around here to look after this "old faithful" and I am wondering who can sort me out. I have an error code SC 495 and from what I have been able to understand so far this means one or several of the following:
Toner Pump supply motor
Bad connection to pump motor
Toner supply clutch
Bad connection to supply clutch
Low toner sensor
Spring for sensor
Blocage of toner in pump or tubes
Another miscellaneous bit of information...it is impossible to remove the top (empty) toner bottle...the green tab will not push in to enable removal of this bottle
Can any of you guys out there help me please or could send me drawings, descriptions on what to do...any help would be much appreciated...all my thanks in anticipation