SR3050 jam code 166
I need some help trying to figure why this intermittent jam is happening. I have replaced the exit motor and updated firmware. Stapling feature is not being used and when we select "sort" the paper stack tries to feed out and the exit motor makes a loud stalling noise. Have checked for stripped gears on shafts and all looks good as well as all the drive belts. Also I do not see anything broken or missing pieces or parts. I ran a set of 10 stacks and all will work well and then the next job I start it may jam on the 2nd set. Anybody seeing this out there?
Ricoh - Aficio MP 2851 / MP 3351 equivalent to
Savin - 9228 / 9233
Lanier - LD528 / LD533
Ricoh - Aficio MP 2851 / MP 3351 equivalent to
Savin - 9228 / 9233
Lanier - LD528 / LD533