SC-819 MP 5000

[bob marley]

Re: SC-819 MP 5000

in MP5000B sc 819 occurs when your HDD is bad, try to replaced the HDD first before replacing the RAM, I think HDD is easy to find than the RAM.

format HDD before replacement

[Zaxxon]

Re: SC-819 MP 5000

And while your at it "give me some firmware"

[Zaxxon]

Re: SC-819 MP 5000

Almost two years ago, very early in this thread, Slimslob clearly suggested a similar solution, with very specific advice on how to isolate the problem

I see this as a trend today, like people will have everything "served" with no effort for them self. It is easier to bother 10-20 people than reading through the threads.

And it's Not only on this kind forum, but actually everywhere on the Internet and in the real world too...

[rosspt]

Re: SC-819 MP 5000

Almost two years ago, very early in this thread, Slimslob clearly suggested a similar solution, with very specific advice on how to isolate the problem

People don't search the forum to find an older thread about possible solutions to a similar problem they are having, they just start a new post. Lazy. And people don't read the post very well before offering help either since the original post said that there was no print controller, yet 3 techs suggested hdd fixes. No print controller, no hdd.

I love the site. I think it is fantastic. Hopefully we can all improve in making it better.

[sandmanmac]

Re: SC-819 MP 5000

in MP5000B sc 819 occurs when your HDD is bad, try to replaced the HDD first before replacing the RAM, I think HDD is easy to find than the RAM.

Almost two years ago, very early in this thread, Slimslob clearly suggested a similar solution, with very specific advice on how to isolate the problem

[gear13z]

Re: SC-819 MP 5000

in MP5000B sc 819 occurs when your HDD is bad, try to replaced the HDD first before replacing the RAM, I think HDD is easy to find than the RAM.

[sandmanmac]

Re: SC-819 MP 5000

i got same problem and need to know how you slove this problem..this problem come same like you story.

There are 2 pages of suggestions! Do you care to tell us what, if anything, you've done?!

[ajim shine]

Re: SC-819 MP 5000

If none of the other suggestions have corrected the problem, then you will have to go to the expense of a new controller. Order the correct board as there four different model controller boards and BICU boards. See TSB-006 for identification.

If it is the controller board, make certain that the customer knows that the main power should never be turned off if the operation switch is On or Blinking. According to TSB-038 Reissue, the Basic model of this line can damage the controller board if not turned off properly.

i got same problem and need to know how you slove this problem..this problem come same like you story.

[cleardata]

Re: SC-819 MP 5000

Controller board has expired, you'll need to replace it. Also? Is anyone else finding it odd the response has come from a completely different person?

gotcha!!!

[slimslob]

Re: SC-819 MP 5000

The fix is - THE CONTROLLER BOARD NEEDS TO BE REPLACED.

If none of the other suggestions have corrected the problem, then you will have to go to the expense of a new controller. Order the correct board as there four different model controller boards and BICU boards. See TSB-006 for identification.

If it is the controller board, make certain that the customer knows that the main power should never be turned off if the operation switch is On or Blinking. According to TSB-038 Reissue, the Basic model of this line can damage the controller board if not turned off properly.

[TonerMunkeh]

Re: SC-819 MP 5000

The fix is - THE CONTROLLER BOARD NEEDS TO BE REPLACED.

[edwin206]

Re: SC-819 MP 5000

Hi,
I am trying to fix the unit .Machine's physical condition is as under. I interviewed the operator(accused one).
The machine is without hard disk and print option etc.It's a simple copier MP5000B and the problem occur during a sudden switching of light.

I could not understand that of serial number of BICU and NVRAM.

Trying to enter SP mode through SP mode but did not do so. SC-819 on display and unit stand still.
I am very obliged to the seniors for very precious guidance. Thanks to all and still wandering for the fix.

[Moza]

SC 819 on this machine is very common and pretty much always the controller occasionally may also be be the BICU.

[JustManuals]

Re: SC-819 MP 5000

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[slimslob]

Re: SC-819 MP 5000

Hi,
It is an AFICIO MP5000 unit with constant SC-819.
Machine stops at "PLEASE WAIT " state for 5 minutes approximately and then shows SC819.Is there any solution for the problem .I have tried to avail its boards locally but nothing is available.
Please give some solution to get rid of it.
No fax unit unit is in machine and no print controller etc.I am very new to these models.

Prior to the SC-819 first occurring did you or anyone else try to enable the network interface using SP 5985-001 without first installing the additional memory? If so, you will need to install the additional 256K of memory, Memory Unit Type G. If the addition memory has been installed, it could be not seated properly or bad.