AN APOLOGY

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cucuklotz
    Senior Tech

    Site Contributor
    500+ Posts
    • Mar 2007
    • 611
    #1

    AN APOLOGY

    Sorry I Cannot contribute as much as most of others on this bullentin board,My experience is limited to machines of the distant past,the forerunners of todays equipment that you all post about.So in the end,I become a taker and not much of a giver.I do some service and try my past to make a living to pay my rent.So
    my service on any new equipment is VERY MINIMAL.So I have very little to offer in terms of newer equipment help,I AM AT YOUR MERCY THEN>The one thing I do have is that WE ARE ALL TECH BROTHERS ,I HAVE OVER 35 years experience in the copy business ,that at the very least makes me ONE OF YOU>Someday you may find yourself in the position I am now in,dependant on The HELP of newer Techs.Please respond to my once in a while pleas for help on this TECH bulletin board,YOU MAY FIND YOUSELF IN MY SHOES SOMEDAY
    Tags: bulletin, copy, equipment, offer, position, service, tech, techs
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Re: AN APOLOGY

      Originally posted by cucuklotz
      Sorry I Cannot contribute as much as most of others on this bullentin board,My experience is limited to machines of the distant past,the forerunners of todays equipment that you all post about.So in the end,I become a taker and not much of a giver.I do some service and try my past to make a living to pay my rent.So
      my service on any new equipment is VERY MINIMAL.So I have very little to offer in terms of newer equipment help,I AM AT YOUR MERCY THEN>The one thing I do have is that WE ARE ALL TECH BROTHERS ,I HAVE OVER 35 years experience in the copy business ,that at the very least makes me ONE OF YOU>Someday you may find yourself in the position I am now in,dependant on The HELP of newer Techs.Please respond to my once in a while pleas for help on this TECH bulletin board,YOU MAY FIND YOUSELF IN MY SHOES SOMEDAY
      I'm not Ricoh trained, but I'll try to help with Sharps if I can; good luck to you!
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • antoney suresh das
          Trusted Tech

          100+ Posts
          • May 2011
          • 103
          #3
          Re: AN APOLOGY

          wake up bro we have a whole world of smart techs to support don't feel so lowdown spend time with manuals and you would be sure up to date
          'CHEER UP BUDDY"

            Comment

            • cucuklotz
              Senior Tech

              Site Contributor
              500+ Posts
              • Mar 2007
              • 611
              #4
              Re: AN APOLOGY

              THANK YOU ZOOTECH and I guess anoney suresh das. As for all the smart techs that you refer to,Why cant one give me some insight into my
              question about a machine recommendation that I previously posted.If I had the experience and knowledge on the machines I was talking about I WOULD HAVE HELPED in any way possible.
              ANDY

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 23008
                  #5
                  Re: AN APOLOGY

                  There's no need to apologize cucuklotz. You don't have bad karma here. I just think there aren't a lot of these printers in the field, and not many techs that see them. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Tonerbomb
                      AutoMajical Resolutionist

                      Site Contributor
                      2,500+ Posts
                      • Feb 2005
                      • 2589
                      #6
                      Re: AN APOLOGY

                      Originally posted by blackcat4866
                      There's no need to apologize cucuklotz. You don't have bad karma here. I just think there aren't a lot of these printers in the field, and not many techs that see them. =^..^=
                      I agree with Blackcat4866 !! There probably isn't alot of feedback for these models...
                      Mystic Crystal Revelations

                        Comment

                        • HP:guy
                          Trusted Tech

                          250+ Posts
                          • Feb 2013
                          • 279
                          #7
                          Re: AN APOLOGY

                          Can't find your request what do you need?

                            Comment

                            • blackcat4866
                              Master Of The Obvious

                              Site Contributor
                              10,000+ Posts
                              • Jul 2007
                              • 23008
                              #8
                              Re: AN APOLOGY

                              Ricoh printer 4310N:

                              http://www.copytechnet.com/forums/ri...coh-4310n.html
                              =^..^=
                              If you'd like a serious answer to your request:
                              1) demonstrate that you've read the manual
                              2) demonstrate that you made some attempt to fix it.
                              3) if you're going to ask about jams include the jam code.
                              4) if you're going to ask about an error code include the error code.
                              5) You are the person onsite. Only you can make observations.

                              blackcat: Master Of The Obvious =^..^=

                                Comment

                                • slimslob
                                  Retired

                                  Site Contributor
                                  25,000+ Posts
                                  • May 2013
                                  • 37490
                                  #9
                                  Re: AN APOLOGY

                                  Originally posted by cucuklotz
                                  Sorry I Cannot contribute as much as most of others on this bullentin board,My experience is limited to machines of the distant past,the forerunners of todays equipment that you all post about.So in the end,I become a taker and not much of a giver.I do some service and try my past to make a living to pay my rent.So
                                  my service on any new equipment is VERY MINIMAL.So I have very little to offer in terms of newer equipment help,I AM AT YOUR MERCY THEN>The one thing I do have is that WE ARE ALL TECH BROTHERS ,I HAVE OVER 35 years experience in the copy business ,that at the very least makes me ONE OF YOU>Someday you may find yourself in the position I am now in,dependant on The HELP of newer Techs.Please respond to my once in a while pleas for help on this TECH bulletin board,YOU MAY FIND YOUSELF IN MY SHOES SOMEDAY
                                  You mention you have over 35 years experience. You do not mention your age though. At 65, I will be 66 just under 2 months, I have over 40 years in the office machine business, mostly copiers. Do some online studying of computer networking and check some of your local dealer who can use a little part time help. It won't very long for you to get up to speed with many of us here and you should quickly get ahead of most of the younger techs who come with some very simple problems.

                                    Comment

                                    • cucuklotz
                                      Senior Tech

                                      Site Contributor
                                      500+ Posts
                                      • Mar 2007
                                      • 611
                                      #10
                                      Re: AN APOLOGY

                                      HI,
                                      Yes the site is VERY HELPFUL..That has Never been an issue.It has been a savoir to me many times.I just felt like venting.Maybe Im becoming a crotchety old fart.In the old days MANY techs I worked with were reluctant to share for fear of being no longer needed .I know that is NOT a problem here,but not having a response conjured up feelings of those early days.
                                      IM GOING WITH RICOH <BLACKCAT IS USUALLY ON THE MONEY

                                        Comment

                                        Previous template Next
                                        Working...