Mpc 4500 fusing belt destroyed again

[ash_572]

I have an mpc 4500 that tears up the fusing belt nearly every morning.
I refurbished the whole fuser unit changing everything and all bearings and it still tears up the belt.

i then replaced the IH coil unit where the ferrite roller sits in and still the same.
Has anyone else encountered the same problem??

[TonerMunkeh]

Re: Mpc 4500 fusing belt destroyed again

Plenty. Unfortunately these fusers get to a point where they just can't be rebuilt any more and require a complete replacement. Plus side is though, if you have a printer fuser you can swap the covers and the harness and just use that.

[ash_572]

Re: Mpc 4500 fusing belt destroyed again

Customer has also said that it happens first thing in the morning after standby. Destroying the belt. Very bizarre

[Llama God]

Re: Mpc 4500 fusing belt destroyed again

Plenty. Unfortunately these fusers get to a point where they just can't be rebuilt any more and require a complete replacement. Plus side is though, if you have a printer fuser you can swap the covers and the harness and just use that.

I agree, plus the printer version of the fuser only costs a couple of quid more than a full rebuild.