mp c2000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CrapAimer
    Trusted Tech

    250+ Posts
    • Jan 2010
    • 296

    #1

    mp c2000

    Replaced BICU board put the original NV Ram into the new one machine comes up with serial no. mismatch SC195. put the original board back in with the nv ram it is fine.

    Original fault is a SC220 laser problem for which I have replaced the laser unit.

    Any ideas would be appreciated

    George
  • Cipher
    It's not easy being green

    1,000+ Posts
    • May 2006
    • 1309

    #2
    Re: mp c2000

    You need to re-enter the machines serial number via the factory SP mode.
    • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

    Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

    Comment

    • collme
      Ricoh tech

      Site Contributor
      100+ Posts
      • Apr 2010
      • 221

      #3
      Re: mp c2000

      Originally posted by Cipher
      You need to re-enter the machines serial number via the factory SP mode.

      like

      Comment

      • Debs1964
        Service Manager

        1,000+ Posts
        • Oct 2010
        • 1693

        #4
        Re: mp c2000

        Originally posted by Cipher
        You need to re-enter the machines serial number via the factory SP mode.
        You don't need factory mode to input the serial number, just special SP5811
        There are 10 types of people in this world, those who understand binary maths and those who don't

        Comment

        • CrapAimer
          Trusted Tech

          250+ Posts
          • Jan 2010
          • 296

          #5
          Re: mp c2000

          done that, been informed that the bicu board for the 2000 is different from the 2500

          George

          Comment

          • JustManuals
            Field Supervisor

            5,000+ Posts
            • Jan 2006
            • 9838

            #6
            Re: mp c2000

            This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:





            Paul@justmanuals.com

            Comment

            Working...