savin 2535(ricoh aficio 1035)

[mkopoiuy]

machine was working ok.
i cleaned machine.
after clean i turn on the machine.
machine is showing sc-998.
what did i do wrong?
and how can i clear this problem?
i would apreciate if somebody tell the solution.

won

[hosennet]

machine was working ok.
i cleaned machine.
after clean i turn on the machine.
machine is showing sc-998.
what did i do wrong?
and how can i clear this problem?
i would apreciate if somebody tell the solution.

won

[Froota]

what did i do wrong?
and how can i clear this problem?
i would apreciate if somebody tell the solution.

won

Hey,

Maybe you cleaned too mutch.....
Are you sure nothing is disconnected, or loose connectors?
Maybe uninstall all units (fusing, transfer, pcu and dev. box) and check everything, and re-install.

good luck,
Froota

[mkopoiuy]

Hey,

Maybe you cleaned too mutch.....
Are you sure nothing is disconnected, or loose connectors?
Maybe uninstall all units (fusing, transfer, pcu and dev. box) and check everything, and re-install.

good luck,
Froota

thank you very much for your advice!
now it is ok after make sure all the connectors.

thanks again.

won