[Dead] Aficio 1060 , no display, only stand by Led , SC code Led and Door open.

[Codex]

Hello
i have a "dead "Aficio 1060, on start up the "Door Open" Led, the "SC code" Led and the "Stand-By" led lights, nothing else happens, THE DISPLAY REMAINS BLACK.......but......if i try to access the machine via browser i can change settings and do something else, the machine is online. I think it's some problem with the I/O Board or the Power supply.


Any ideas???

Thanks

[ruben]

Re: Aficio 1060 , no display, only stand by Led , SC code Led and Door open.

From Goose's Guide:

B064/B065	BLANK DISPLAY	[operation panel - no display] - fuse 1 0 1
B064/B065	BLANK DISPLAY	[operation panel - no display] - replace PSU

[gear13z]

Re: Aficio 1060 , no display, only stand by Led , SC code Led and Door open.

have u check the nvram, and HDD?

[Codex]

Re: Aficio 1060 , no display, only stand by Led , SC code Led and Door open.

Problem solved!!!

I changed the Power Suupply board, and the machine works fine now.
Thank you for your suggestions!