we have installed three weeks ago a Pro 8120S.
The machine shows the SC 672-12 (controller startup error) code as an error on the operation panel.
We asked for a new PCB CTRL board. In the meantime our technician played with the dip switch setting on the old board.
On the new board all dip switches are in off positions.
Do you have any idea what the correct positions are for the dip switch.
Please give me your advise.
The machine shows the SC 672-12 (controller startup error) code as an error on the operation panel.
We asked for a new PCB CTRL board. In the meantime our technician played with the dip switch setting on the old board.
On the new board all dip switches are in off positions.
Do you have any idea what the correct positions are for the dip switch.
Please give me your advise.