If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyone know where i can get the parts and serivce manual;for richo mp c6000? Need to rebuild a fuser and i can not see how to crack it open!!! Looked at just manuals but could not find it in the serach engine.
Thanks
Make sure to clean and grease the bearings and gears on this model. Especially on the pressure roller. The MPC6000s have a bad habit of those rusting if you don't grease them properly. Just an fyi.
Comment