If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have search for resolved error SC542 but when ...
C Yellow - 107 - RED after 5810 but NOT FOUND WHEN OPEN MENU.
That's because the reset is done by simply entering SP mode and powering machine off/on.
You should try FIXING THE PROBLEM that is causing the Error, then resetting it
If you have gone into service mode and rebooted while in SM and code doesn't go away, your thermistor is shot. Thermistors are cheap. Just buy a new one.
If you have gone into service mode and rebooted while in SM and code doesn't go away, your thermistor is shot. Thermistors are cheap. Just buy a new one.
Comment