[Error Code] SPC 830DN how to enter service mode

[saa]

Hello

Please guide me how to enter service programme mode in sp c830dn printer.

please......

Thanks

[slimslob]

Re: SPC 830DN how to enter service mode

If power is "ON" press the :Home" and "Simple Screen" keys at the same time ab=nd hold for at least 3 seconds, then press the "User Tools" key.

if power is "OFF" hold down the "Home" and "Suspend" keys while turning the power "ON".

This is from the service manual. If you don't have one, get one. If you don't have access to a Ricoh tech site to download one, you can buy one at JustManuals.com. The price is very reasonable.

[saa]

Re: SPC 830DN how to enter service mode

If power is "ON" press the :Home" and "Simple Screen" keys at the same time ab=nd hold for at least 3 seconds, then press the "User Tools" key.

if power is "OFF" hold down the "Home" and "Suspend" keys while turning the power "ON".

This is from the service manual. If you don't have one, get one. If you don't have access to a Ricoh tech site to download one, you can buy one at JustManuals.com. The price is very reasonable.

Thanks you very much...