3224C Display

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SloopJohnB
    Junior Member
    • Dec 2014
    • 4
    #1

    3224C Display

    Hello

    Had an accident over the weekend and cracked the display screen on the machine. Is there a company I can get a second hand unit from as I have tried Ricoh here in New Zealand, no luck.

    Thanks for any advice.

    John B
    Tags: None
    • sandmanmac
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Feb 2009
      • 3981
      #2
      Re: 3224C Display

      Not sure if you mean just the touch panel (glass) or the whole LCD screen?
      The Original P/N for the glass was B213 5222, and the LCD B213 5225
      Either way, both were common among several different models (Below). Maybe a dealer has a parts machine with a good LCD and/or touch screen.
      Otherwise ebay (?)
      • Ricoh Aficio 2035
      • Ricoh Aficio 2045
      • Ricoh Aficio 3025
      • Ricoh Aficio 3030
      • Ricoh Aficio 3035
      • Ricoh Aficio 3045
      • Ricoh Aficio MP 2510
      • Ricoh Aficio MP 3010
      • Ricoh Aficio MP 3500
      • Ricoh Aficio MP 4500

        Comment

        • SloopJohnB
          Junior Member
          • Dec 2014
          • 4
          #3
          Re: 3224C Display

          I believe its only the glass as all the icons are still shown under the glass but I can't change any of the setting. I have not removed it from the machine yet but will post a photo soon.
          Photocopier.jpg
          Last edited by SloopJohnB; 12-08-2014, 07:36 AM.

            Comment

            • Polarbear
              Service Manager

              1,000+ Posts
              • Feb 2012
              • 1070
              #4
              Re: 3224C Display

              Yip it is only the touch panel "overlay" that is cracked. Thankfully the lcd below is still ok. As per the previous post, you can use any one on the models listed if you can find a second hand op panel.

              It is a bit of work as there are plenty screws holding the circuitry to the back of the op panel, and all these need to be remove to extract the touch panel glass.

              When you re-assemble, just be mindful that the touch panel is resting between locating "dots" that are in each corner of the actual op panel frame. If this is not the case, the glass will crack when you tighten the circuit boards back onto the op panel frame. Basically the glass needs to lay flat on the op panel frame and not raised in any of the corners.
              Press the GREEN button!!

                Comment

                • TonerMunkeh
                  Professional Moron

                  2,500+ Posts
                  • Apr 2008
                  • 3865
                  #5
                  Re: 3224C Display

                  Last part number I knew was H310 9900. Don't know if it's still valid.
                  It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                  Hit it.

                    Comment

                    • SloopJohnB
                      Junior Member
                      • Dec 2014
                      • 4
                      #6
                      Re: 3224C Display

                      Can anyone advise where I can buy an overlay?

                        Comment

                        • Luther
                          Senior Tech

                          500+ Posts
                          • May 2006
                          • 682
                          #7
                          Re: 3224C Display

                          EBAY. pretty inexpensive also

                            Comment

                            • Zaxxon
                              Senior Tech

                              500+ Posts
                              • Jan 2014
                              • 608
                              #8
                              Re: 3224C Display

                              Remember to mount it with the correct side up.
                              Please start you post with brand, model, problem.

                                Comment

                                • sandmanmac
                                  Field Supervisor

                                  Site Contributor
                                  2,500+ Posts
                                  • Feb 2009
                                  • 3981
                                  #9
                                  Re: 3224C Display

                                  Originally posted by SloopJohnB
                                  Can anyone advise where I can buy an overlay?
                                  I believe I gave 2 suggestions in my first reply - including Ebay

                                    Comment

                                    Previous template Next
                                    Working...