Lanier LD520c missing parts

[CopierChick]

I went to a new customer that has a Lanier LD520c copier that wouldn't duplex and I found parts missing on the top right door. We work on Canons mainly and did this as a favor and can't seem to figure out what parts are missing. I can't seem to figure out if it's just a gear or pulley with a retaining clip or if there are more parts needed there. I believe it is the transport roller that is missing the parts... Does the part # B2234464 seem right? Does anyone have access to this machine and could post a pic of this area for me? Or take a look at the pix I have attached and see if you know what the parts are because I need to be sure before ordering a bunch of parts that I may not need and I have to give a quote to the customer and want to make sure it's correct.
thanks so much

[LNorris]

Re: Lanier LD520c missing parts

you are missing a pulley and a belt, i have a pic of mine, but taking forever to d/l.

pulley B2234464
belt D0394592

[slimslob]

Re: Lanier LD520c missing parts

you are missing a pulley and a belt, i have a pic of mine, but taking forever to d/l.

pulley B2234464
belt D0394592

The belt goes from the pulley you are missing to the one shown in the third picture you attached.

[CopierChick]

Re: Lanier LD520c missing parts

you are missing a pulley and a belt, i have a pic of mine, but taking forever to d/l.

pulley B2234464
belt D0394592

Could you email the picture you have? Copiersrus@gmail.com

[slimslob]

Re: Lanier LD520c missing parts

Could you email the picture you have? Copiersrus@gmail.com

Did you read my previous post? There is a pulley on a shaft with no belt on it pictured in the third picture you attached to your original post.

[CopierChick]

Re: Lanier LD520c missing parts

Did you read my previous post? There is a pulley on a shaft with no belt on it pictured in the third picture you attached to your original post.

Yes I see what you are talking about now, Thanks. Do you know if the pulley needs a retaining clip to hold it on or is it built into the pulley? and can you think of any other parts that may be needed for the duplex unit to operate properly? (It makes perfect copies otherwise, just jams on double sided copies of course)
thanks so much

[TonerMunkeh]

Re: Lanier LD520c missing parts

The retaining clip is part of the gear. The gear and belt will fix the jamming issue as long as the exit unit and junction gate unit at the top of the side door are okay.

[slimslob]

Re: Lanier LD520c missing parts

Yes I see what you are talking about now, Thanks. Do you know if the pulley needs a retaining clip to hold it on or is it built into the pulley? and can you think of any other parts that may be needed for the duplex unit to operate properly? (It makes perfect copies otherwise, just jams on double sided copies of course)
thanks so much

I have had these come off in the past. The tab on the belt pulley becomes weak and the pulley comes off. Usually find both inside the bottom of the duplex unit. Usually order a new pulley as once they come off they keep doing so.

[Iowatech]

Re: Lanier LD520c missing parts

I have had these come off in the past. The tab on the belt becomes weak and the pulley comes off. Usually find both inside the bottom of the duplex unit. Usually order a new pulley as once they come off they keep doing so.

Maybe you meant the tab on the pulley?
Sorry, that's the only thing I've seen for that, not sure where the tab on the belt is.

[slimslob]

Re: Lanier LD520c missing parts

Maybe you meant the tab on the pulley?
Sorry, that's the only thing I've seen for that, not sure where the tab on the belt is.

I left out a word.