Ricoh 1035

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tcypy1961
    Senior Tech

    500+ Posts
    • Feb 2009
    • 773
    #1

    Ricoh 1035

    can't get rid of SC 352 codes; replaced ID sensor twice;2nd ID sensor I replaced today allowed me to get SP3001 to set without error code; however after about 20 copies SC 304 followed by SC 352 came up. Another thing I notice is when copier is shut down the powered back up copies are light and SP 2001 has changed. Could this be an NVRAM problem???
    Thanks!!!
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37490
      #2
      Re: Ricoh 1035

      I think SC 304 is the key to the problem. Both codes relate to drum charge, possible over toning and possible coated development (mag) roller. If you do not currently have a copy of Goose's Guide, download it and follow the trouble shooting steps it lists.

        Comment

        • Tonerbomb
          AutoMajical Resolutionist

          Site Contributor
          2,500+ Posts
          • Feb 2005
          • 2589
          #3
          Re: Ricoh 1035

          Kill it and replace it!!!!!!!!!!!!!!!!!!!!!!!!!!
          Mystic Crystal Revelations

            Comment

            • bob marley
              Service Manager

              1,000+ Posts
              • Jan 2012
              • 1339
              #4
              Re: Ricoh 1035

              Check the charge roller , I think bushings are dirty and preventing it from moving
              Live for yourself and you will live in vain. Live for others, and you will live again

                Comment

                • Athlontini
                  Trusted Tech

                  250+ Posts
                  • Jun 2012
                  • 269
                  #5
                  Re: Ricoh 1035

                  ^^This was what worked for me the last time I saw an SC304.

                    Comment

                    • Richariri
                      Trusted Tech

                      100+ Posts
                      • Dec 2013
                      • 163
                      #6
                      Re: Ricoh 1035

                      I keep getting 304 on an MP4000, i cleaned the charge roller, contacts and bushings then developer and mag roller were replaced. cleaned ID sensor and reinitialised.

                      Still get the SC304 coming in on @remote, but no issues on CQ.

                      So yer, we've abandoned hope until the CQ goes downhill.

                        Comment

                        Previous template Next
                        Working...