Unable to Access MPC7501 WIM, Telnet etc

[Itanic]

Hi Guys. First post after long time reading of forums. We got an MPC7501 back from a customer who at some point had changed the admin password and we believe also had access control locked down to one PC on the network. Was told what the password was but incorrect as cant login still via Control Panel or Via Telnet or Http. Cannot change IP address as insuficient privileges and have tried connecting by it's 169 IP address when the DHCP times out still to no avail.
Have tried an SP5801-011 Memory Clear > NCS also to no avail and even wiped the HDD and it still won't let me in! Any suggestions please? Regards

[Itanic]

Re: Unable to Access MPC7501 WIM, Telnet etc

Have sorted now after perservering. tried to delete the thread but might not have privileges to do so.. thanks for looking.

[anothertech]

Re: Unable to Access MPC7501 WIM, Telnet etc

Have sorted now after perservering. tried to delete the thread but might not have privileges to do so.. thanks for looking.

How did you get it fixed?

[Itanic]

Re: Unable to Access MPC7501 WIM, Telnet etc

Logged in as supervisor in SP mode. 5846-46 which isn't there when you login normally... found it in another thread on the forums.. maybe i didn't look properly! :-)