I started working on this machine that had an initial problem of a jam. I found paper debris in the finisher and once removed the jam code went away. I tried make a copy to see if the jam would occur again and got an error code SC335. I replaced the polygonal mirror motor and the SC335 code went away. again I tried to make a copy and this time an error code SC130 appeared. That indicates either BICU and/or SBU failure. Does anyone know where either of these parts can be sourced? Anyone had these problems? This machine is in a prison and has not had surge protection during power failures and generators came online. Should I expect more electrical related problems here?
Thanks
Thanks