PUNCH UNIT B702

[Cipher]

Re: PUNCH UNIT B702

From an alternative support resource, not the service manuals.

[garyk]

Re: PUNCH UNIT B702

DIP Switch settings:

2-Hole Punch (Japan) 1: OFF 2: ON
4-Hole Punch (Overseas) 1: ON 2: ON

what manual are you getting dip switch settings? i looked in service manuals for: af mpc7500,sr4010, hole punch 3260

[garyk]

Re: PUNCH UNIT B702

You have not specified the finisher and MFP models that the punch unit is being used with. DIP switch settings are usually in the MFP or finisher service manual.

ricoh aficio mpc7500 with sr4010 finisher i have checked service manuals and could not find dip switch info

[Cipher]

Re: PUNCH UNIT B702

The US version of the hole punch unit is probably different.

Letter size would commonly be hole punched with 2 or 3 holes, but probably not 4 holes as Letter is shorter than A4.

https://en.wikipedia.org/wiki/Hole_punch

[slimslob]

Re: PUNCH UNIT B702

what is correct settings for (usa)

You have not specified the finisher and MFP models that the punch unit is being used with. DIP switch settings are usually in the MFP or finisher service manual.

[garyk]

Re: PUNCH UNIT B702

DIP Switch settings:

2-Hole Punch (Japan) 1: OFF 2: ON
4-Hole Punch (Overseas) 1: ON 2: ON

what is correct settings for (usa)

[Cipher]

Re: PUNCH UNIT B702

DIP Switch settings:

2-Hole Punch (Japan) 1: OFF 2: ON
4-Hole Punch (Overseas) 1: ON 2: ON

[garyk]

what are the dip switches on punch unit board(pcb3) for? and what are correct positions?