Good day all.
I replaced the Paper feed and Retard rollers on the machine above but the counter clear/reset option is not available in the tech menu.
Did some research but could not find a solution to this.
I have done a Firmware update to latest and a memory clear but nothing changed.
Fuser, Torque, Transfer and Scan count resets are all there but no PF.
Any other way to reset these counters?
Thanks in advance.
I replaced the Paper feed and Retard rollers on the machine above but the counter clear/reset option is not available in the tech menu.
Did some research but could not find a solution to this.
I have done a Firmware update to latest and a memory clear but nothing changed.
Fuser, Torque, Transfer and Scan count resets are all there but no PF.
Any other way to reset these counters?
Thanks in advance.