Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

[servicesinfosl]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

I've been on CTN for a while, and this is going to continue be one of the weirdest things I see around here. A bunch of people begging for stuff that most of the time they should be able to find here even if they could be bothered to use the standard search. Or find out exactly why their requests won't work even a little bit that way and do them better.
Oh, well, I wish them all good luck. And if they can show me something I can help them with I will try.

I did search for "EDC for CLP-310 series" as specified in the Samsung Service Manual before posting. Samsung clearly states the CLP-310 series is DIFFERENT than the CLP-300 series Engine Diagnostic Control. All I could find was the CLP-300 series EDC posted here or via a Google search. This is why I posted if anyone had the CLP-310 series EDC on hand and were willing to share. Only then I figured out the CLP-300 actually does work nicely under the right operating system and proper options/environment.

I thought that was the purpose of these forums. To ask perplexing questions and receive help and enlightenment from other members. I am new to this particular forum but an old hand to others.

I did get excellent and fast help and information from another member here.

The is just my two cents and please, I don't mean to frustrate anyone. Honest.

[ropie]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Sorry to drag this from the grave, but could I get some assistance with this? I've got the CLP-300 EDC but can't get it to work with my 315. Thanks.

[masky]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Got the program from a person who wishes to remain anonymous and got the counters re-initialized. Printer now working.

Hello
I have the same problem as you, I would like for private to tell me how to reset the counters since I just changed I just changed my ITB (Image Transfer Belt)
and I find myself with the problem of not being able to put counters at 0

Thanks

[Phil B.]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Hello
I have the same problem as you, I would like for private to tell me how to reset the counters since I just changed I just changed my ITB (Image Transfer Belt)
and I find myself with the problem of not being able to put counters at 0

Thanks

this thread is YEARS old.

[Lance15]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Samsung printers are now owned by HP.

[Phil B.]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Hello
I have the same problem as you, I would like for private to tell me how to reset the counters since I just changed I just changed my ITB (Image Transfer Belt)
and I find myself with the problem of not being able to put counters at 0

Thanks

the previous posters ( from years ago ) informed us you need the Samsung EDC program, now that Samsung has sold out to HP it is almost IMPOSSIBLE to get parts/help on their line.

[Lance15]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

Can't even find this EDC program on the HP Channel Services Network. Not sure if the SPDS maybe took it's place?

SPDS PC Installation Guide-En.pdf

[blackcat4866]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

I know I'm going to regret this, but here goes anyway:

This is the one and only version of EDC that I have. It was written for WinXP 32bit.
No, I don't know if it will work with your Windows version XX.
No, I will not upload it again just for you.
No, I will not explain it in minute detail.

If you can use it, great.
If you can't, I don't really need to know. =^..^=

[masky]

Re: Samsung CLP-315W Fuser/Transfer Belt Counter Reset (EDC Program)

I know I'm going to regret this, but here goes anyway:

This is the one and only version of EDC that I have. It was written for WinXP 32bit.
No, I don't know if it will work with your Windows version XX.
No, I will not upload it again just for you.
No, I will not explain it in minute detail.

If you can use it, great.
If you can't, I don't really need to know. =^..^=

THANKS