Is there anyone out there who manufactures or remans the feed section for Sharp LCTs? I have an LC12 on a Sharp 1054 with 4 million and it has misfeeding issues from the LCT that are frequent, but intermittent and difficult to diagnose to a specific part or parts. Sharp doesn't offer the feed unit as an assembly, and I have disassembled one from a previous model that is highly similar.... it is a real stinker to take apart and rebuild. I'm preparing to order clutches, torque limiters, etc, but want to make every effort possible to see if there is any way to get an entire assembly without replacing the entire LCT. We don't have a used LC12 in our warehouse at the moment, and I would be happy to settle for having an old feed assembly that I could at least rebuild in the shop instead of the customer's office. Any help would be appreciated.
Comment